Charging Phases - AEG LL10.0 Bedienungsanleitung

cHarGInG PHases

Step 1: Condition check
The charger checks the battery condition and calculates the required
charging parameters
Voltage
0 V to 05 V
05 V to 15 V
15 V to 12 V
12 V to 14 V
14 V to 15 V
>15 V
Step 2: Precharging
The battery is gently charged with a low charging current to return the battery to a
chargeable state
Step 3: Soft start
The battery is gently charged with a low charging current
Step 4: Full load charging
The battery is quickly and safely charged at the set charging current
Step 5: Absorptionsladung
The battery is charged at a current end-of-charge voltage until charging current
no longer flows
Step 6 Float charge
The charging voltage will be reduced, charging is complete
Step 7: Monitoring
The charger monitors the battery capacity once the battery falls below 128 V,
the charger will emit a charging pulse This maintains the battery's highest possible
charging level
function
„error" leD (18) lights up Incorrect connection
„Bad Battery" leD (10) lights up Battery defective
charging will start
Trickle charge will start
Battery fully charged „full" leD (11) lights up
„error" leD (18) lights up
GB
33