Alarm Functions; Setting The Alarm - Auriol IAN 288616 Bedienungs- Und Sicherheitshinweise

Alarm functions

The light alarm clock features an
acoustic and a visual alarm.
The visual alarm is a light which appears in
the illuminated panel
adjustable. You may further set a lead time.
The lead time is the time from the alarm time
setting during which the brightness of the light
field will gradually increase from zero to the
set value (sunrise simulation).
Choose from eight different soundscapes, an
electronic alarm sound or radio reception as
the acoustic alarm. The volume of the acoustic
signal can be selected. The signal starts at the
set alarm time at a low volume and adjusts to
the set value within a few minutes.
The alarm features an alternate simple
alarm function and snooze function.
When selecting the simple alarm function, shut
off the alarm with a simple button of a button.
When selecting the snooze function the signal
will turn off and sound again 10 minutes later.
This process can be repeated any number of
times until the alarm finally shuts off.
. The brightness is
1

Setting the alarm

In clock mode, hold the ALARM button
for 3 seconds to enter alarm setup
17
mode.
Press the + button
19
to change the respective flashing value.
TIP: Holding the + button or the − button
will rapidly scan forward or backward
through the numbers. When no button is
pressed for 30 seconds, the light alarm
clock with automatically return to clock
mode.
Briefly press the ALARM button
confirm the setting. This will take you to
the next alarm settings option.
· Hour
· Minute
· Select alarm mode: Chose from the
following alarm mode display
bols:
: sleep
: simple alarm
No display : Alarm function deacti-
vated
Select alarm signal: Choose from the
following alarm signals, indicated by the
numbers 01 to 10 with the note sign
flashing:
Note:
01–08 are indicated by
or the − button
20
to
17
sym-
24
GB 11