Lighting; Mood Light; Battery Operation; Replacing Batteries - Auriol IAN 288616 Bedienungs- Und Sicherheitshinweise

Lighting

Press the SNOOZE
white guide light will appear in the
illuminated panel
Press the SNOOZE
to switch the light off again.
The visual alarm will also work when the light
is on. The light will then be deactivated and
will reappear after the alarm.

Mood light

Note: When selecting "02 mood light
mode" after this appears for color selection
"C1–C8" and then the light intensity can be
selected in 5 steps.
The mood light function activates a dim col-
oured light in the illuminated panel
Press the LIGHT+ button
mood light.
Repeatedly press the LIGHT + button
increase the brightness 1–5, and to switch it
off. Or press the LIGHT– button
the colour scale as follows C1-C9:
Mood light off: → red → orange →
yellow→ cyan → green → Sky blue →
Purple→ automatic colour change →
colour chosen during automatic
14 GB
button . A
12
.
1
button again
12
.
1
to activate the
22
to
22
to change
21
colour changing
Activating the mood light does not impact the
functionality of the visual alarm. The mood
light will be switched off and on again after
the alarm.

Battery operation

The inserted batteries are only to backup the
clock display and alarm function. In the event
of a power failure the light alarm clock will
automatically switch to battery mode.
The clock will continue running in battery
mode. To save energy, only the electronic
alarm will sound. All light functions and the
radio are non-operational.
Once power returns via the low voltage jack
all functions of the light alarm clock will be
available again.

Replacing Batteries

Batteries should be replaced at least once a
year to ensure reliable function of the light
alarm clock.
To do so, open the battery compartment
cover on the underside of the light
11
alarm clock by pressing the latch in the
,
8