Baxi PRIME 26 Betriebsanleitung Für Den Installateur Seite 20

6.2.4 Installation of the external sensor (accessory available on request)
It is important to choose a point where the sensor can detect the external conditions in a correct and efficient manner. Recommended
locations (A):
• On a side of the area to be heated, possibly facing north. At mid-height of the area to be heated.
• Out of direct sunlight. In an area that is easy to access.
Locations not recommended (B):
• Isolated by a structural element of the building (balcony, roof, etc.).
• Near a source of heat that could cause interference (direct sunlight, flue pipe, ventilation grille, etc.).
A
1/2 H (min. 2,5 m)
1
H
1 2
Z
1/2 Z
1/2 H (min. 2,5 m)
Refer to chapters 6.6 and 9.1 on how to make the electrical connection and set the parameters.
The external sensor is not included in supply but is available separately upon request.
7696306 (01-12/17)
C1
2
2 1
H
MW-8800N001-2
C2
B
20
BO-0000015
MW-8800N002-1