Silvercrest SBSK 5.0 A1 Kurzanleitung Seite 123

♦ Press the
on . You will hear a rising series of beeps and the op-
erating/charging LED
orange and blue and then alternately orange and blue .
Select the entry SBSK 5 .0 A1 from the list of found
♦
devices on your Bluetooth
enter the code 0000 to connect the two devices . You will
hear a beep and the operating/charging LED
blue at 3-second intervals once the connection has been
successfully established .
Start playback on the Bluetooth
♦
To switch off the earbuds and deactivate the Bluetooth
♦
function, press the
hear a descending series of beeps and the operating/
charging LED
and blue and then goes out .
To connect further Bluetooth
follows:
♦ Switch on the earbuds and press the
about 2 seconds . Now, the earbuds are in pairing mode
and can be connected to another Bluetooth
■ 114 │
button for 2 seconds to switch the earbuds
button
flashes briefly simultaneously orange
GB │ MT
flashes briefly simultaneously
® device and, if required,
® device .
for 2 seconds . You will
devices, proceed as
®
flashes
button for
® device .
SBSK 5.0 A1
®