Beyerdynamic UNITE TH Bedienungsanleitung Seite 22

22
• Change the channel on the receiver via the dynamic
channel search. Press the p or q symbol of the channel
buttons and confirm the displayed "Scan for channels?"
question with "Yes" by pressing the menu button. Depending
on the DECT environment and the distance to the transmitter,
it may take several seconds to find the channels.
• Press the p or q symbol of the channel buttons to select the
transmitter (channel name). In order to confirm press the
On/Off and menu button
Note: Once the channel search is started, the receiver will
lose its connection to the previous transmitter.
5.4 How to create a pairing
There are three different ways to pair the Unite transmitters with
receivers:
1. Via an individual charger.
2. Using the Unite Manager Software on a PC.
3. Via dynamic channel search.
If you want to use a group ID of the individual encryption range
1 to 149, you must perform a pairing with a charger or the Unite
Manager PC software.
You will find detailed descriptions in the Quick Start Guide of
the appropriate charger, in the Unite Manager PC software
manual and in the comprehensive system manual on the
internet at www.beyerdynamic.com/Unite
Unite TH – Handheld Transmitter
.
Channel Name
TH1 TH2
Name 1 | Name 2
Name 1 or Name 2
RP
Same Group ID