Beyerdynamic UNITE TH Bedienungsanleitung Seite 9

Unite TH – Handheld Transmitter
Indicator light
Flashes red slowly for
10 seconds
Flashing green/
yellow rapidly
Flashing red/green
rapidly
Flashing red rapidly
Display
The display indicates the channel name, battery status
and different menus.
On/Off and menu button
Use the on/off button to turn the transmitter on or off. To
switch off the device, hold down the button for 5 seconds.
In order to activate the main menu, hold down the button
for 2 seconds. Use the menu button to confirm settings. For
a detailed description of the individual menus and menu
items, please refer to the Unite manual on the internet at:
www.beyerdynamic.com/unite
Multifunction button
If you are in a menu, you can scroll through the menu to
make various settings.
The following functions are available as shortcuts by using
the multifunction button:
1. Talkback function on / off
On the Unite TH you can activate/deactivate the
Talkback function: Press and hold the q symbol of the
multifunction button > 2 seconds until "hi Talkback" is
displayed. Select the desired Talkback "On" or "Off"
option.
As a third option you will find "Request". When using this
option, the speaker can select on the transmitter if
he/she wants to accept ("Accept") or refuse ("Deny") the
request. You will find a detailed description in the system
operating instructions at: www.beyerdynamic.com/unite
2. Clear function
When the Talkback function is activated on the
transmitter ("Master") and Unite RP-T receiver, you can
use the Clear function to centrally turn off all activated
microphones.
To do this, briefly press the q symbol of the multifunction
button on the Unite TH. Then confirm the "Clear Mics"
prompt with "Yes" or "No".
3. Button lock
In order to activate or deactivate the button lock
function, press and hold the mute button
q symbol of the multifunction button for more than
3 seconds.
Charging status
• Too many transmitters in
the charger when pairing
is initiated
• Other paring error
Device is being localised
Firmware update is running
Charging error
9
and the p or