Mitsubishi Electric EHGT17D-YM9ED Bedienungsanleitung Seite 12

4
Customising Settings for Your Home
[Holiday Mode]
Holiday mode can be used to keep the system running at lower
flow temperatures and thus reduced power usage whilst the
property is unoccupied. Holiday mode can run either flow temp.,
room temp., heating, compensation curve heating and DHW all
at reduced flow temperatures to save energy if the occupier is
absent.
From the main menu screen press button E should be pressed.
Be careful not to hold down button E for too long as this will turn
off the controller and system.
Once the holiday mode activation screen is displayed you can
activate/deactivate and select the duration that you would like
holiday mode to run for.
en
Press button F1 to activate or deactivate holiday mode.
●
Use buttons F2, F3 and F4 to input the date which you would
●
like holiday mode to activate or deactivate holiday mode for
space heating.
<Editing holiday mode>
Refer to the menu tree in "Main remote controller" of Installation
Manual.
Should you require the Holiday mode settings e.g. the flow temp.
or the room temp. to be altered you should contact your installer.
[Schedule timer]
Scheduled timer can be set in two ways, for example; one for
summer and the other for winter. (Refer to as "Schedule 1"
and "Schedule 2" respectively.) Once the term (months) for the
Schedule 2 is specified, rest of the term will be specified as
Schedule 1. In each Schedule, an operational pattern of modes
(Heating) can be set. If no operational pattern is set for Sched-
ule2, only the pattern for Schedule 1 will be valid. If Schedule 2
is set to full-year (i.e. March to Feb.), only the operational pat-
tern for Schedule 2 will be valid.
The schedule timer is activated or deactivated in the op-
tion screen. (See 'General Operation' section)
<Setting the Schedule period>
1. From the main settings menu use F2 and F3 to highlight the
schedule icon then press CONFIRM.
2. The Schedule period preview screen is displayed.
3. To change the Schedule period, press F4. button.
4. The time bar edit screen is displayed.
5. Use F2/F3 button to point at a starting month of the Sched-
ule2, then press CONFIRM.
6. Use F2/F3 button to point at an ending month of the Sched-
ule2, then press CONFIRM.
7. Press F4 to save settings.
<Setting the Schedule timer>
1. From the main settings menu use F2 and F3 to highlight the
schedule icon then press CONFIRM.
2. From the schedule 2 period preview screen use F1 and F2 to
scroll through the selecting each subtitle in turn by pressing
CONFIRM.
3. The schedule timer sub menu will be displayed. The icons
show the following modes;
• [Heating]
• [DHW]
4. Use F2 and F3 buttons to move between mode icons press
CONFIRM to be shown the PREVIEW screen for each mode.
11
Schedule2 period preview screen
Schedule1 mode select screen