Troubleshooting - Dometic SKYSCREEN POWERED Montage- Und Bedienungsanleitungen

Skyscreen Powered
Replacing the fabric panel
➤ Fabrics can be removed for cleaning or replacement (fig. 9, page 7 and
fig. 0, page 7 for installations without headlining or fig. a, page 8 for
installations with headlining).
Due to batch variation, replacement fabric colours may vary slightly in shade.
10

Troubleshooting

Fault
Moving rail not straight
Moving rail jams.
Motor not working
Motor running slow or fast
AP Remote control (optional) not operat-
ing
Motor runs but blind does not move
EN
Solution
➤ Disconnect the first fabric panel at the
opposite end to the crooked moving
rail (fig. 9, page 7 and fig. 0, page 7
for installations without headlining or
fig. a, page 8 for installations with
headlining).
➤ Adjust the coupling (fig. b, page 8).
➤ Check the side tracks for debris or
obstructions.
➤ Check if wiring for voltage to the motor
is correct.
➤ If power supply is checked and the
motor is still faulty contact your
distributor.
➤ If using the AP Remote control refer to
the AP Remote control manual.
➤ Check for correct supply voltage.
➤ Refer to the AP Remote control
manual.
➤ Check inside the side tracks for
obstructions.
➤ Check that the side tracks have been
installed properly and have not been
twisted or distorted too far in or out.
Troubleshooting
19