Function Test - HomeMatic IP HmIPW-SPI Installations- Und Bedienungsanleitung

• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
If you are already using Homematic IP devices in
your smart home system or if you want to combine
your Homematic IP wired devices with wireless
Homematic IP components, you can also connect
the Homematic IP wired devices to an (installed)
Access Point. Therefore, connect the Homemat-
ic IP Wired Access Point to the (already installed)
Homematic IP Access Point, as described in the
user manual. Afterwards, please proceed as de-
scribed above to connect the presence sensor.
7

Function test

The function test is only activated if the presence
sensor has already been connected.
The function test can be activated via the Home-
matic IP app
Up to 10 minutes after connecting the device or
establishing the power supply (if the device has already
been connected), the device LED (B) indicates detected
movements. The LED flashes green with every movement
detected. In this way, the detection range and sensitivity
can be checked directly on the device.
Function test
55