Product Characteristics - Peg Perego adjustable base Gebrauchsanleitung

EN_English
Thank you for choosing a Peg-
Pérego product.
• Peg-Pérego S.p.A. is ISO 9001
certified.
• This certification offers
customers and consumers a
guarantee of transparency and
confidence in the company's
mode of operation.

product characteristics

• IMPORTANT: "Adjustable Base" is a car
seat base to be used together with the
"Primo Viaggio", "Primo Viaggio SIP" and
"Primo Viaggio tri-fix" car seats for children.
• IMPORTANT: "Adjustable Base" (Group
0+) must be fitted facing opposite to the
direction in which the vehicle normally
travels, on seats without an airbag. Do
not fit "Adjustable Base" on seats facing
backwards or seats which face each other.
• Using "Adjustable Base" guarantees greater
safety and makes it easier to fit the "Primo
Viaggio tri-fix" car seat correctly.
• "Adjustable Base" is attached to the car with
the vehicle's seat belt and can be left in the car
ready for the "Primo Viaggio tri-fix" car seat to
be fitted to it.
• The "Primo Viaggio tri-fix" car seat can be fitted
on the front passenger seat, if it does not have
an airbag, or on the rear seat. The child's car
seat must not be attached to a car lap belt or
a two point belt as they do not secure the seat
properly. The car seat can only be attached to
three-point seat belts.
• The "Primo Viaggio tri-fix" car seat can easily be
attached to the "Adjustable Base" thanks to the
"Ganciomatic System", which also allows you
to attach the "Primo Viaggio tri-fix" car seat to
Peg-Pérego strollers and chassis.
• The "Primo Viaggio tri-fix" car seat (Group 0+),
has passed all of the safety and type-approval
tests required by European standard ECE
R44/04, for children weighing from 0-13 kg (0-
12/14 months).
BaseAdjustable_FI000701I64.indd 7 BaseAdjustable_FI000701I64.indd 7
warning
• Read the instructions carefully before use
and keep them in the holder provided for
future reference. Failure to closely follow
the installation instructions for the car
safety seat will put your child at risk.
• The assembly and installation operations must
be conducted by adults.
• Avoid inserting fingers into the mechanisms.
• Install this group 0+ safety seat base facing
opposite to the normal forward movement of
the vehicle.
• Death or serious injury can result if this safety
seat base is installed on seats with airbags.
• Eliminate danger by disabling airbags
surrounding the position of the car safety seat.
• In the case of rotating or movable seats it
is important to install the car safety seat
base facing opposite to the normal forward
movement of the vehicle.
• When travelling take special care to make sure
that luggage or other objects do not injure the
child in the safety seat in the case of accidents.
• Do not use installation methods different from
those indicated. This would result in the risk of
detachment from the seat.
• Group 0+, "Universal" base for car seat, type-
approved in accordance with European
standard ECE R44/04 for children weighing
from 0-13 kg (0-12/14 months). Suitable for the
majority of seats in vehicles, but not all.
• The car seat base can be correctly installed if
in the vehicle's use and maintenance manual
it states that it is compatible with "Universal",
group 0+ holding systems.
• This car seat base is classified "Universal"
according to stricter type-approval criteria
than previous models which do not have a
type-approval label.
• This car seat base can only be used on
approved vehicles which have static or inertia-
reel three-point seat belts and are approved
according to UN/ECE regulation no.16 or
equivalent standards. Two-point belts or lap
belts must not be used.
• To install the base with the car seat, pass the
vehicle's three-point seat belt through the
appropriate fittings, which are a light-blue
colour. Do not use installation methods which
20-06-2007 11:19:39 20-06-2007 11:19:39