Further Safety Directions; Safety Functions; Assembly - FLORABEST FKS 2200 F3 Originalbetriebsanleitung

functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.

Further safety directions

• If the supply cord of this power tool is
damaged, it must be replaced by a spe-
cially prepared cord available through
the service organization.
• If it is necessary to replace the connec-
tion cable, we recommend that this be
performed by the manufacturer or an
authorised representative (e.g. authorised
workshop, customer service, etc.).
• Lay the extension cable in such a way
that it will not be caught by branches or
similar during sawing.
• Use a surge protector with a release cur-
rent of 30 mA or less.
• Comply carefully with maintenance, con-
trol and service instructions in this manual.
Damaged protective devices and parts
have to be repared or changed except
as noted otherwise in this manual.

Safety functions

1 Rear grip with hand guard (16)
A
Protects the hand against branches
and boughs in the case of spring-
ing away by the chain.
3 Chain braking lever/
hand guard
Control system, which stops the
saw chain immediately in case of
a spring-back; lever can also be
activated manually; protects the
left hand of the operator if it slides
from the front grip.
The motor cannot be turned on if
the chain brake has engaged.
5 Saw chain with small
spring-back
Helps you to catch spring-backs
with specially developed control
systems.
7 Metal stop claw
Reinforces the stability when
vertical cuts are carried out and
facilitates sawing.
9 Electric motor
Double insulated for safety reasons.
10 On-off switch with safety
chain brake
On releasing the On/Off switch,
the device immediately switches off.
11 Switch-on block
The switch-on block must be
released for switching on the
device.
12 Chain catcher
Decreases the danger of injuries
the chain breaks or if it comes off.

Assembly

Always wear protective
gloves when working with
the chainsaw and employ
only original parts. Pull out
the power plug before doing
any work on the chainsaw
itself -– injury hazard!
Before putting the electric chain saw into
operation, you must:
- install the blade, saw chain and chain
cover where necessary,
- adjust the saw chain tension,
- pour in chain oil,
- check the function of the chain brake
and the automatic oil pump.
G B MT
if
6 7