Activating Log-On Mode Using The Duofern Radio Code - RADEMACHER RolloTube S-line DuoFern Original - Betriebs- Und Montageanleitung

16.3 Activating log-on mode using the DuoFern radio code

The RolloTube S-line DuoFern can be set to log-
on mode in combination with a HomePilot® or a
DuoFern manual central operating unit by entering
its radio code, in order to activate other DuoFern
devices (e.g. DuoFern manual transmitter).
Time window for activation via
DuoFern radio code
After switching on the power supply, the radio code
is active for a maximum of 2 hours. Once this time has
elapsed, activation using the radio code is no longer
possible. Briefly disconnect the RolloTube S-line Du-
oFern from the mains to reactivate the time window.
The DuoFern radio code can be found on the
enclosed label
It is imperative that you store the en-
i
closed label safely e.g. by fixing it to the
cover sheet of these instructions.
This means that you will still be able to
access log-on mode for the RolloTube
S-line DuoFern without having to open
the roller shutter system.
EN
Example:
71