Intended Use; Delivery Content - VOLTCRAFT GM-70 Bedienungsanleitung

3. Intended use

The magnetic field analysis device is intended for detecting magnetic DC and AC fields. It is a highly sensitive
magnetic field measuring device for a wide range of applications in industry, development, electronics and mechanics.
It is suitable for checking the function of energised coils, e.g. in relays, in solenoid valves, etc. Since it is a non-contact
magnetic field analysis device, in most cases you will not need to open the housing to facilitate testing.
The sensor enables the measurement of DC and AC magnetic fields in the range 300 to 3000 mT or 150 to 1500 mT
(millitesla). When measuring DC magnetic fields, the polarity of the magnetic field (north/south) is displayed. The high
sensitivity of the sensor enables measurement of magnetic fields for reference purposes. An RS232 interface allows
forwarding and processing of measurement data by means of an appropriate (optional) data cable.
A 9 V block battery is required for operation (included). Operation with a power adapter is also possible. The power
adapter is not included with the product.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom) must
be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes other than
those described above may damage the product. In addition, improper use can cause hazards such as a short circuit
or fire. Read the operating instructions carefully and store them in a safe place. Only make this product available to
third parties together with its operating instructions.
All company and product names included herein are trademarks of their respective owners. All rights reserved.

4. Delivery content

• 1x Magnetic field analyser
• 1x Probe
• 1x 9 V battery
• 1x CA-06 storage case
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
20