Troubleshooting; Care And Cleaning; Disposal; A) Product - VOLTCRAFT GM-70 Bedienungsanleitung

11. Troubleshooting

Error
The measuring device cannot be
switched on.
A stable measured value cannot be
displayed.
The measuring device cannot be
operated.

12. Care and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these can damage the
casing or even impair the function.
• Always disconnect the product from the power supply before cleaning it.
• Use a dry, lint-free cloth to clean the product.

13. Disposal

a) Product

Electronic devices are recyclable waste and must not be placed in household waste. At the end of its
service life, dispose of the product according to the relevant statutory regulations. Remove any inserted
battery and dispose of it separately from the product.
b) Battery information
You are required by law to return all used batteries (Battery Directive). They must not be placed in
household waste.
Batteries containing hazardous substances are labelled with this symbol to indicate that disposal in
household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (indicated on the battery, e.g. below the waste bin icon on the left).
Used batteries can be returned to local collection points, our stores or battery retailers.
You thus fulfil your statutory obligations and contribute to environmental protection.
32
Potential cause
Are the batteries flat?
Wrong measurement? Has the
sensor been moved too forcefully?
Has the correct measuring mode
been selected?
Undefined system status.
Remedy/potential solution
Check the battery status. Reset the
measuring device by pressing the
RESET button (9).
Hold the sensor still.
Check whether the set measuring
mode (AC or DC) is suitable for your
object.
Reset the measuring device by
pressing the RESET button (9).