Installation - Miomare 270065 Montage-, Bedienungs- Und Sicherheitshinweise

Note: Familiarise yourself with the product prior to assembly. Carefully
read the following assembly instructions and safety advice. In the event
of incorrect installation, all warranty claims – particularly in relation to
subsequent damage – are excluded.
Follow these steps:
270065_Spueltisch-Armatur_Content_PL_HU_CZ_SK.indd 9
CAUTION! DAMAGE TO THE ARTICLE! Please have all instal-
lations performed by skilled individuals.
Please note that the seals are wear parts and must be changed from
time to time.
Any leakage or sudden escape of water can cause considerable
damage to buildings and property. All connections must therefore
be checked carefully to ensure that they are tight.
Familiarise yourself prior to installation with all local conditions, e.g.
water connections and shut-off device.
The product is only suitable for use in rooms in which a temperature
above 0 °C is maintained.

Installation

CAUTION! Before you start installation turn off the water supply at
the mains. Otherwise injuries and / or property damage may occur.
CAUTION! Do not twist or strain the connection hoses
Note: This step requires a slot screwdriver and a SW 12 mm
open-end spanner.
CAUTION! Be sure to only fasten the connecting hoses
tight (see Fig. A). Do not use pliers or a wrench. Otherwise the
product could be damaged.
Screw the two connecting hoses
boreholes in the fitting body
hand tight into the designated
9
(see Fig. A).
2
.
9
hand
9
GB 9
13.08.15 17:33