Herunterladen Inhalt Inhalt Diese Seite drucken

Before Use; Assembling The Product; Dismantling The Hose; Initial Use - Silvercrest SBSB 750 A1 Bedienungs- Und Sicherheitshinweise

Bodenstaubsauger
Vorschau ausblenden Andere Handbücher für SBSB 750 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

the product, for example stones,
paper waste, etc.
Do not vacuum up any liquids or
damp dirt. Allow wet-cleaned or
shampooed carpets to dry fully
before vacuuming them.
Do not vacuum up any toner dust
from printers or copiers. This may
conduct electricity. Furthermore,
the filter system cannot filter out
the toner dust entirely. It would
thus potentially end up back in
the room via the blower.
Replace the dust bag as soon as
it is full. When doing so you should
also check the HEPA filter and
replace it if necessary. Otherwise
the suction power may be reduced.
Do not stand or sit on the product.

Before use

Note: If you open the packaging with a sharp knife
or other sharp objects, ensure that you do not dam-
age the product. Be very careful when opening the
packaging.
Remove the product from the packaging.
Check that the delivery contents are complete.
Check to see if the product or the individual
parts are visibly damaged. If this is the case, do
not use the product, instead contact customer
services (See ‚Service centre' section).
34 GB/MT

Assembling the product

Place the vacuum cleaner
Insert the socket end of the hose
suction opening. The socket end of the hose
must noticeably click into place (see Fig. A).
Attach the telescopic wand
When doing so, rotate the telescopic wand
right and left for a more stable hold.
Select a nozzle from the delivery contents
according to the surface to be vacuumed:
· Floor brush
: Use this attachment to vacuum
8
a dusty carpet or hard floor.
· Parquet brush
: Use this attachment to
9
vacuum particularly delicate surfaces.
· Crevice nozzle
3
vacuum in places that are not easy to reach.
· Furniture brush
7
vacuum objects which have particularly delicate
surfaces.
Take the chosen nozzle and insert it into the
other end of the telescopic wand
Note: Alternatively, you can also insert the
chosen nozzle directly into the handle of the
hose
.
2

Dismantling the hose

To loosen the hose
and at the same time pull the hose
11
of the suction opening.

Initial use

CAUTION! RISK OF INJURY!
Always be attentive when oper-
ating the product. Injuries may
otherwise occur.
Always vacuum stairs from bottom
to top.
Do not vacuum people or animals.
on the floor.
1
into the
2
to the hose
4
: Use this attachment to
: Use this attachment to
.
4
, press the unlock buttons
2
out
2
.
2
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis