Before First Use - Silvercrest SAST 18 A1 Kurzanleitung

ATTENTION! PROPERTY DAMAGE!
The batteries in this appliance cannot be replaced .
►
►
UN 3481 1
Tel. ____________
The mains adapter is for indoor use only .

Before first use

1) Remove all packaging materials from the appliance .
2) Check whether the filter holder
in the dirt container
To insert the filter holder
proceed as follows:
–
The filter holder
position . The side labelled "UP" must be facing upwards . Push the filter
holder
the filter holder
container
–
Insert the HEPA filter
the HEPA filter
holder
arrow on the filter holder
the
3) Place the dirt container
–
First, place the contacts on the underside of the dirt container
the contact pins on the underside of the motor unit
two catches on the motor unit
container
–
Press the upper side of the dirt container
the motor unit
container
SAST 18 A1
The product is equipped with or supplied with
a lithium-ion battery . Do not throw the batteries
into a fire and do not subject them to high
temperatures . There is a risk of explosion!
. They may have worked loose during transport .
i
u
can only be fitted in the dirt container
u
as far as possible into the dirt container
u
is straight and that the rubber lip seals the dirt
u
.
i
z
fit into the corresponding recesses on the filter
z
. The arrow on the HEPA filter
u
symbol .
i
.
i
so that the catch audibly engages . The dirt
r
is now firmly seated on the motor unit
i
and the HEPA filter
u
and the HEPA filter
z
into the filter holder
u
must be aligned with the
z
. Turn the HEPA filter
u
on the motor unit :
r
into the recesses on the dirt
r
against the upper side of
i
are firmly installed
z
into the dirt container
in one
i
. Make sure that
i
so that the catches on
clockwise towards
z
onto
i
. This pushes the
r
.
r
GB │ IE │ 9
,
i
■