Configuration - HBM AED series Kurzanleitung

AED System Digital Transducer Electronics

2.1 Configuration

Basic device,
type
AED9101D
AED9201B
AED9301B
AED9401A
AED9501A
Digital inputs and outputs allow:
• processes to be controlled via four limit values
• triggered measured values to be determined (MAV) and
• a filling or dosing process to be controlled.
• A diagnostic function has been built into the AD103C to analyze dynamic
measurement. This function includes a memory for 512 (binary) measured
values and associated status information. Different recording modes are
available so that the processes can be analyzed without interrupting mea-
surement.
A1780−4.3 en/de/fr/es/it
Interfaces
RS232, RS485
RS232, RS485
PROFIBUS
CANopen or
DeviceNet
CANopen or
DeviceNet
Inputs / outputs
Trigger input
Digital I/O
(electrically
isolated)
Digital I/O
(electrically
isolated)
Digital I/O
(electrically
isolated)
Trigger input
7
Amplifier to
install
AD103C
HBM