Maintenance - Chicco TRIO LOVE UP Gebrauchsanleitung

er will not come into contact with
your child.
• Make sure that the person using the
stroller knows how to do it in the
safest way.
• This product must only be used by
an adult.
• The product must be assembled by
an adult.
• To avoid all strangulation risks, nev-
er give children objects with cords or
strings attached, or leave them with in
proximity of such objects.
• Never use the stroller on staircases
or escalators: you could suddenly
lose control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller has been exposed di-
rectly to sunlight for a long time,
you must let it cool down be-
fore placing your child inside of it.
Prolonged exposure to direct sun-
light may cause the colour of the
materials and fabric to fade.
• Prevent the stroller from contact
with salty water. It might cause the
formation of rust.
• Do not use the stroller on the beach.
• When unused, the stroller should
be kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance. Cleaning
and maintenance operations must be performed exclu-
sively by an adult.
CLEANING
Clean the fabric parts using a wet sponge and neutral soap.
The lining can be removed (please refer to the section
"Fitting/removing the seat lining"). Please refer to the care
labels for instructions on how to clean the fabric parts.
Below are the cleaning symbols and their meanings:
Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Routinely wipe clean plastic parts with a soft damp cloth.
Never use solvents or abrasive detergents. In case the stroll-
er has come into contact with water, always dry the metal
parts to prevent rust formation.

MAINTENANCE

Regularly check the condition of the wheels and, keep
them clean from dust and sand. To avoid friction that may
prevent correct operation of the stroller, make sure that all
the movable plastic parts along the metal frame are clean
from dust, dirt or sand. Keep the stroller in a dry place.
Lubricate the moving parts only if necessary, with a light
application of a silicone based lubricant.
LIST OF COMPONENTS
Check that none of the components of this model are miss-
ing before assembling the product. If any part is missing,
contact Chicco Customer Service. No tools are needed to
assemble this product. The following pieces are needed for
product assembly:
• Frame
• Seat
• Seat lining
• Hood
• Bumper bar
• Comfort kit (shoulder and crotch straps)
• Storage basket
• Bag
• Leg cover
• Rain cover
• Joined handgrip
OPENING THE STROLLER FRAME
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance. Make sure
that during these operations the moving parts of the stroll-
er will not come into contact with your child.
1. With the stroller positioned vertically (fig.1) lift both
handles to the relevant position by pushing the buttons
on the sides (fig. 1 A). Make sure that the handgrips are
locked in position for use.
2. To open the frame, press the button shown in Fig. 2 (1-
push). Then lift the stroller's handgrips and raise the stroll-
er to make it easier for it to open (Fig. 2A). The stroller
is completely opened when the tubes are completely
fixed to the front (fig. 2B). To complete the opening of the
stroller, press the rear crossbar (fig. 2C).
FITTING/REMOVING THE SEAT LINING
3. Fitting the lining must be done with the seat disengaged
from the stroller Before starting, open the waist buckle
shown in fig. 3.
4. Fit the lining by sliding it first on the backrest (fig. 4) and
insert the waist strap in the relevant slots in the lower
part of the backrest (fig. 4 A). Then insert the crotch strap
in the slot in the seat (fig. 4B).
14
5.
6.
7. T
t
r
t
To
ord
SA
Th
co
str
8. W
y
t
i
9.
10
WA
us
sam
WA
wa
rec
re
BU
11
WA
ne
WA
wi
FIT
12
WA
ly
WA
the
ce
the