Warranty - Chicco TRIO LOVE UP Gebrauchsanleitung

on the rear brake levers.
25. To brake the stroller, press the right lever down (fig. 25).
A red STOP sticker automatically appears and the oppo-
site lever springs up.
26. To release the stroller, press the left lever down (fig. 26).
A green GO sticker automatically appears and the oppo-
site lever springs up.
WARNING: Always apply the brakes whenever the stroller
is stopped. Never leave the stroller on a sloped surface, with
a child inside, even with the parking brakes engaged.
WARNING: After operating the brake lever, ensure that the
brakes are correctly engaged in both of the rear wheel units.
SWIVEL WHEELS
The stroller has front swivel/fixed wheels. It is recommend-
ed to use the wheels in the fixed mode on particularly
changeable surfaces. The use of the wheels in the swivel
mode is recommended in order to increase the control of
the stroller on a normal road surface.
27. To make the front wheels swivel, push the front lever
down with your foot as shown in fig. 27. To block the
front wheels in fixed mode, raise the lever with your
foot. On fixed mode, all the wheels will remain locked
in straight position.
WARNING: Both wheels must always be locked or un-
locked at the same time.
FOLDING THE STROLLER
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance. Ensure that
during these operations the moving parts of the stroller will
not come into contact with your child. The stroller can be
closed either forward or parent facing. The instructions are
the same for both positions.
Before closing the stroller, close the hood by aligning it with
the backrest.
WARNING: Always disengage the joined handgrips (if
present) before closing the stroller.
WARNING: You must remove all contents from the basket
before closing the stroller.
28. To close the stroller, press button 1 – push (fig 28) and
at the same time press button 2 under the wording
2-pull (fig. 28 A). Keeping both buttons pushed, pull
up to activate the closing mechanism (fig. 28 B). The
stroller is now closed completely (fig. 28 C). To reduce
the space occupied by the stroller when closed, re-
cline the backrest.
WARNING: Once closed, button 1 returns to its starting
position (protruding), fig. 28D.
29. Tilt the handgrips forward (fig. 29). The closed and
locked stroller stands by itself.
USING THE CARRYCOT AND CAR SEAT
This stroller can fit only with Oasys 0+ UP/Oasys I-size child
car seat and the Love Up carrycot. They both require the same
fastening system to be attached on the structure. To fasten
and release the carrycot or child car seat, read the related
instructions. Before attaching the child car seat or carrycot,
remove the stroller seat.
WARNING: Before using the stroller with the carrycot or
child car seat, always make sure that the fastening system
is properly locked.
WARNING:
CAR SEAT: If not properly locked, press both
white keys on the fitting device of the structure and re-
peat the fitting procedure checking the complete locking.
Otherwise contact the Chicco customer service.
WARNING: before using, make sure that the carrycot is
properly attached by pulling it upwards.
COMFORT KIT
The Comfort Kit comprises 2 shoulder straps and crotch strap.
30. Fit the shoulder straps over the straps as shown in figure 30
and insert the crotch strap in the relevant slot (fig. 30 A).
LEG COVER
The leg cover can be used in two different ways.
31. The leg cover can be placed over the bumper bar and fas-
tened within the slots as illustrated in fig. 31. Otherwise,
you can pass the leg cover's upper part under the bump-
er bar and fasten it by inserting the buttons through the
slots at the sides of the hood (fig. 31A).
BAG
32. The bag can be used in two different positions. Option
1: fasten the bag using the two buttons positioned on
the sides as shown in fig. 32. Option 2: fasten the bag
to the stroller's handgrips passing the shoulder strap
through the relevant slots as shown in fig. 32 A.
WARNING: do not overload. The bag must not weight more
than 2 kg.
CARRY-ALL BASKET
The stroller is equipped with a spacious basket.
33. To attach the basket on the stroller, insert the fabric strip
placed on the front in the relevant slot and fasten the
button (fig. 33). Repeat this operation on the other side.
34. Fasten the basket also on the rear by fastening the fabric
strip on the tube shown in fig. 34 by using the button.
Insert the velcro in the relevant space and fold it on the
basket (fig. 34 A).
RAIN COVER
The stroller is equipped with a rain cover.
35. Attach the rain cover on the stroller using the slots in
the fabric located above the joint of the lateral tubes
and the snap buttons located above the front wheels
(fig. 35). After use, if wet, let the rain cover to dry before
folding and storing it. The rain cover can be used both
forward facing and parent facing.
WARNING: The rain cover cannot be used on the stroller
without hood, as it may cause suffocation. When the rain cover
is fitted on the stroller, never leave it exposed to direct sunlight
with the child inside, as the temperature will rise considerably.
Important Note: The pictures and instructions contained
in the booklet are referred to the complete stroller mod-
el. Some of the components and functions described here
may vary depending on the model purchased.

WARRANTY

The product is guaranteed against any conformity defect in nor-
mal conditions of use as provided for by the instructions for use.
The warranty shall not therefore apply in the case of damag-
es caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects please
refer to the specific provisions of national laws applicable in
the country of purchase, where provided.
16
IM
-
IN
C
U
A
EN
EN
D
A
•
•
• A
b
l
d
•
•
• L
e
i
s
u
d
• A
d
o
e
• A
c