Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
or bed. Should your child need to
sleep, then they should be placed
in a suitable pram body, cot or bed.
• Before assembly, ensure that the
product and its components have
not been damaged during trans-
portation. In this case, do not use
and keep out of reach of children.
• During adjustment operations, en-
sure that the moving parts of the
stroller do not come into contact
with your child.
• Make sure that the person using
the stroller knows how to operate
it in the safest way.
• This product must only be used by
an adult.
• The product must only be assem-
bled by an adult.
• To avoid all strangulation hazards,
never give children objects with
cords or strings attached, or leave
them close to such objects.
• Never use the stroller on staircases
or escalators: you could suddenly
lose control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller is left exposed to direct
sunlight for an extended period of
time, allow it to cool down before
placing your child inside. Prolonged
exposure to direct sun light may
cause the colour of the materials
and fabric to fade.
• Prevent the stroller from coming
into contact with salt water. It may
cause rusting.
• Do not use the stroller on the
beach.
• When not in use, the stroller should
be kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance. Cleaning and main-
tenance should only be carried out by an adult.
CLEANING
The seat of the stroller can be removed (please see the section FIT-
TING AND REMOVING THE STROLLER LINING). Clean the fabric parts
using a wet terrycloth and neutral soap. Periodically wipe the plastic
parts clean with a soft damp cloth. To prevent the formation of rust,
always dry metal parts if they have come into contact with water.
The washing symbols and relative meanings are indicated below:
Hand wash
Do not bleach
30° C
Do not tumble dry
Do not iron
Do not dry clean

MAINTENANCE

If necessary, lubricate the moving parts with dry silicone lubricant.
Regularly check the condition of the wheels and clean off all dust
and sand. To avoid friction that may compromise the correct func-
tioning of the stroller, make sure all plastic parts that run along the
metal tubes are clean of dust, dirt and sand.
Keep the stroller in a dry place.
GENERAL INSTRUCTIONS
OPENING THE STROLLER AND FIRST ASSEMBLY
WARNING: When opening the stroller, make sure that your child or
other children are at a safety distance.
WARNING: Make sure that during these operations the moving
parts of the stroller do not come into contact with your child.
1. Grip the handle (Fig. 1) and pull upwards until the structure opens
fully (Fig. 1A).
WARNING: Before use, ensure that the stroller is locked in the open
position, checking that the mechanism is effectively locked.
2. Assemble the front wheels by inserting the pin of the wheel into
the appropriate hole until it locks in place (Fig. 2). To remove
them, press the metal pin behind each wheel (Fig. 2A).
WARNING: Before use, ensure that the wheels have locked correctly.
3. Install the bumper bar by inserting it into the appropriate slots
located on the joints of the stroller (Fig. 3). Should you need to
remove it, press the buttons on both sides (Fig. 3A).
WARNING: Never use the bumper bar to lift the stroller up with
your child sitting in it.
CARRY-ALL BASKET
The storage basket is already installed and cannot be removed.
HOW TO USE THE SAFETY HARNESS
This stroller has a five-point safety harness featuring two shoulder
straps, two adjustment holes, a waist strap and a crotch strap with
buckle.
4. WARNING: To use it with children from birth to approx. 6 months
of age, you must use the shoulder straps, first threading them
through two adjusting holes (Fig. 4), and threading the waist strap
through the vertical holes (Fig. 4A).
The height of the shoulder straps can be adjusted by using the dif-
ferent slots found on the backrest.
5. After laying the child in the stroller, fasten the straps (Fig. 5) by
passing first the two forks (A) inside the shoulder strap buckle (B)
and then inside the crotch strap buckle (C); adjust the height of
the shoulder straps so that they correctly fit your child's shoulders
(Fig. 5A).
Always make sure that the straps are fastened correctly. To unfasten
the strap, press and pull the side prongs.
WARNING: To guarantee the safety of your child, the safety harness
13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis