Jacuzzi frame 100 Bedienung Und Wartung Seite 48

Spray jets (TT and TOP models)
L
ocated on the sides of the showerhead, these thin, almost velvety
jets give your body a pleasant sensation of tonicity and vitality.
u Adjust the water temperature as indicated in the "Water jet
functions - temperature adjustment" chapter.
u Then turn the diverter (D) to the indicated symbol.
Waterfall (TB model)
T
he water, which is a true massage for the shoulder area, is lo-
cated above the panel that houses the brassware, near the roof.
u Adjust the water temperature as indicated in the "Water jet
functions - temperature adjustment" chapter.
u Then turn the diverter (D) to the indicated symbol.
Whirlpool jets (TB model)
L
ike a manual massage, these jets act on the lumbar and/or cervi-
cal area in a selective or simultaneous manner.
u Adjust the water temperature as indicated in the "Water jet
functions - temperature adjustment" chapter.
u Then turn the diverter (D) to the symbol:
- L, if you want to use the jets that act on the lumbar zone.
- C, if you want to use the jets that act on the cervical zone.
u Each jet can be tilted by pressing the nozzle and moving it in
the desired direction.
Notes for all models
ù
By positioning the diverter half way between the two sym-
bols, both functions can be used at the same time; obviously the
effect will be less strong, as the pressure will decrease.
After you have finished, in addition to closing the tap, re-
member also to turn the mixer knob to below a value of 38
°C and to position the diverter to the "water temperature
test" symbol (TT/TOP model) or "shower" (TB model).
The maximum temperature of the mixed water must
never exceed 45 °C!
48