Items supplied
The appliance is delivered with the following components as standard:
▯
Hand Blender Set
▯
Measuring beaker with combined lid/base
▯
Whisk
▯
Liquidiser (Blade and bowl with combined lid/base)
▯
Operating instructions
1) Remove all parts of the appliance and these operating instructions from the box .
2) Remove all packing material .
3) Clean all parts of the appliance as described in the chapter "Cleaning" .
NOTICE
►
Check the contents to make sure everything is there and for visible damage .
►
If the contents are incomplete, or have been damaged due to defective
packaging or transportation, contact the Service Hotline (see chapter
Service) .
Disposal of the packaging
The packaging protects the appliance from transport damage . The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable .
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste . Dispose of packaging material that is no longer
needed according to the regionally established regulations .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (b) and numbers (a) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
NOTICE
►
If possible preserve the appliance's original packaging during the warranty
period so that in the case of a warranty claim you can package the appliance
properly for return .
SSMS 600 D3
GB │ IE
│
23
■