Switching A Permanent Light Colour On/Off 70 Starting And Stopping A Colour Cycle - Jacuzzi J-Sha MI Bedienung Und Wartung

Turning on and off
a colour cycle
■ With the keys
on the sector labelled CROMOD R EAM and press the
key. The display will show the icons for the various
colour cycles, as in 27.
27
■ To select a colour cycle, place the flashing cursor on the re-
spective sector. While aiming the remote control at the receiv-
er, as shown in the figure, press the key
■ To select another colour cycle, place the flashing colour on
the respective sector and press the
cle shuts down.
Press the key again to start a new cycle.
■ To turn the spotlight off ahead of time, place the flashing
cursor on the sector for the active colour cycle and press the
key.
NOTE NOTE
• The colour cycles (which, as previously mentioned, run ac-
cording to a factory-set sequence that cannot be modified)
alternate the base colours of the selected cycles and the
colours that supplement them.
Each colour cycle lasts 30 minutes, after which it shuts off
automatically.
or place the flashing cursor
again.
key. The previous cy-
• The "Cromodream ®
use of the other functions (except for sanitizing).
71
" function can also be activated during