Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GML 50 Professional Originalbetriebsanleitung

22 | English
Cause
Radio charger inoperative on AC power supply
Mains socket faulty
Mains plug or cord defective Check mains plug and cable
Radio charger inoperative on DC power supply
Battery contacts
contaminated
Battery pack defective
Battery too warm or too cold
(temperature warning k flash-
ing or radio charger switches
off)
Battery charging or power supply to external devices
inoperative
Mains plug not plugged-in
Battery not inserted
(correctly) for charging
12 V power supply inoperative
No fuse 44 inserted
Fuse 44 blown
Internal thermal fuse
blown/actuated
Radio charger suddenly inoperative
Mains plug or battery not
properly or completely
plugged in
Software error
Bad radio reception
Interference from other de-
vices or insufficient set-up
location
Rod antenna not optimally
directed
Time indication faulty
Back-up batteries of clock
empty
Back-up batteries incorrectly
inserted (wrong polarity)
1 609 92A 11A | (16.3.15)
Corrective Measure
Use another socket
and have repaired as re-
quired
Clean the battery contacts
(e.g. by inserting and remov-
ing the battery several times)
or replace the battery
Replace the battery
Wait until the battery has
reached operating tempera-
ture
Plug mains plug in
(completely)
Have battery engage properly
in charging compartment
Insert fuse 44
Replace fuse 44
Remove external device and
allow radio charger to cool
down
Plug in mains plug or battery
properly or completely
To reset the software, pull the
mains plug and remove the
battery; wait 30 seconds,
then insert mains plug and
battery again
Position radio charger at oth-
er location with better recep-
tion
Turn/change position of rod
antenna
Replace back-up batteries
Insert back-up batteries
correctly
Cause
Remote control inoperative
Battery of remote control
empty
Battery of remote control
incorrectly inserted
(wrong polarity)
Signal of remote control does
not reach reception lens 31
When the corrective measures do not eliminate an error, please
contact an authorised service agent for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning

 The mains cable is provided with a special safety con-
nection and may only be replaced by an authorised ser-
vice agent for Bosch power tools.
For safe and proper working, always keep the radio charger
and the remote control clean.
Do not immerse the remote control into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the radio charger.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Corrective Measure
Replace battery of remote
control
Insert battery of remote
control correctly
Turn radio charger so that re-
ception lens 31 faces toward
the remote control
Bosch Power Tools