Specifications - Makita UM600D Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

UM600D with shear blade for grass shear installed
Model:
Cutting width
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Battery cartridge
Net weight
UH201D with shear blade for hedge trimmer installed
Model:
Blade length
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
Keep bystanders away.
Cutting means continues to run after the
motor is switched off.
Do not expose to moisture.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or battery
Li-ion
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their imple-
mentation in accordance with national laws,
electric equipment and batteries and battery
pack(s) that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
347 mm x 177 mm x 131 mm
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
504 mm x 120 mm x 131 mm
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Intended use
UM600D with shear blade for grass shear installed
The tool is intended for cutting lawn edges or sprouts.
UH201D with shear blade for hedge trimmer
installed
The tool is intended for trimming hedges.
Noise
The typical A-weighted noise level determined accord-
ing to EN50636:
UM600D/UH201D with shear blade for grass shear
installed
Sound pressure level (L
Uncertainty (K) : 0.11 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
The typical A-weighted noise level determined accord-
ing to EN60745:
UM600D/UH201D with shear blade for hedge trim-
mer installed
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
10 ENGLISH
UM600D
160 mm
-1
2,500 min
1.3 - 1.4 kg
UH201D
200 mm
-1
2,500 min
1.3 - 1.5 kg
) : 75 dB(A)
pA
Wear ear protection.
) : 74 dB(A)
pA
Wear ear protection.