Troubleshooting - hanseatic HWT8A3GT Gebrauchsanleitung

Page EN-26

Troubleshooting

Troubleshooting
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if
you can correct the malfunction.
WARNING!
Risk of electric shock! The appliance operates with dangerous voltages.
Never try to repair a defective or suspected defective appliance yourself. You can
■
put your own and future users' lives in danger. Only authorised specialists are al-
lowed to carry out this repair work.
Problem
The display does not
light up .
lights up
lights up
The dryer does not
start .
Malfunction
Possible causes
• The power supply is interrupted . • Check whether the power sup-
• The condensate container (9)
is full .
• The heat exchanger, lint trap (8)
and/or bottom filter (7) are
clogged by lint .
• The power supply is interrupted .
• The door (5) is open .
• No cycle has been selected .
• The dryer has not been
switched on .
Solutions, tips
ply is working properly .
• Check whether the mains plug
is inserted .
• Check the selected cycle .
• Press the On/Off button (1) .
• Empty the condensate contain-
er .
• If you have installed the water
drain hose, make sure that the
drain hose is correctly routed
(siehe „Installing the water
drain hose (optional)" on page
EN-24) .
• If the symbol continues to light
up after that, contact our cus-
tomer service team (see page
EN-29) .
• Clean the heat exchanger, lint
trap and bottom filter .
• Check whether the power sup-
ply is working properly .
• Check whether the door is
closed .
• Check whether a cycle has
been selected .
• Check whether the On/Off but-
ton (1) has been pressed .
• If the dryer still does not start
after that, contact our customer
service team (see page EN-29) .