3 . Place the water drain hose on the holder
(d) and position the holder on the edge of
the utility sink .
Connecting the appliance to
the mains
WARNING!
Risk of electric shock!
The appliance operates with dangerous
voltages.
Do not put into operation if the
■
mains cord is faulty or the appliance
displays other visible damage.
Never connect the appliance via a
■
multi-socket or an extension cord.
• Insert the mains plug into a properly in-
stalled and earthed electric socket that
has been sufficiently secured
(220-240 V~, 50 Hz, 10 A) .
Installation and connection
Before first use
1 . After moving and installation, let the dryer
(d)
stand upright for 2 hours .
2 . Then clean the drum's interior using a soft
cloth .
3 . Place a few clean dry cloths into the
drum . (see
4 . Press the On/Off button (1) .
The display will light up .
5 . Select the "Airing" cycle using the cycle
selector (4) .
6 . Press the Start/Pause button (2) to begin
the cycle .
7 . After the cycle is complete, follow the in-
structions in chapter „Cleaning and main-
tenance" on page EN-20 .
The compressor will make some noise when
it is in operation . This is perfectly normal .
Page EN-25