Herunterladen Inhalt Inhalt Diese Seite drucken

Operation Startup; Adjusting The Telescopic Handle; Handle Adjustment; Resharpening Of The Saw Chain - FLORABEST FHE 550 A1 Originalbetriebsanleitung

 elektrischer hoch-entaster
Vorschau ausblenden Andere Handbücher für FHE 550 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
GB
MT
• If you have no Grizzly bio-oil available,
use chain lubrication oil with low adhe-
sive additive content.
1. Unscrew the oil fill cap (23) and
fill up with chain oil.
2. Wipe off any spilled oil and close
the cap again.
Note that the saw can re-oil.

Operation startup

Observe the country-specific and munici-
pal regulations.
Do not work with the high pruning saw
during general ordinary or prescribed
quiet periods.
1. Before starting, check:
- The tension of saw chain 1
- The oil level
- All nuts and screws are sitting firmly
- Only remove blade cover 24 at the
last minute
- Set the working length of the telescop-
ic arm before switching on the equip-
ment
- Check that shoulder strap 12 is in a
comfortable position that eases your
hold on the high pruning saw
- Ensure that you are wearing protec-
tive clothing
- Check that you are standing safely
- Check your working surroundings
2. Switching on
- Connect the equipment to a power
supply with the supply voltage speci-
fied on the rating plate.
-
Hold the equipment firmly in a relaxed
and safe manner. Operate starting
lock 11 and switch on the pruning saw
at on/off switch 10.
-
The equipment will switch off again
when you release on/off switch 10.
-
For safety reasons, a lockable contin-
uous operation setting is not possible.
54
Adjusting the Telescopic
Handle
H
The telescopic handle can be infinitely
adjusted using quick release 15. Push the
lever forward as shown in the illustration
then push and pull to adjust the handle
length.
Pull back the lever and so fix the desired
working length of the telescopic handle.

Handle Adjustment

I
Loosen pivotal centre 8 and and fixing
the
adjustable handle 9 on position.
• Replace the pivotal centre 8 to fixation.
Resharpening of the
saw chain
Leave the resharpening of a saw chain
to an expert or proceed according to the
instructions of your saw chain sharpener.
Resharpening a saw chain takes some
practice. If in doubt, replacing the saw
chain is preferable.

Accessories Enclosed

J
24 Blade cover
12 Shoulder strap
25 60 ml Grizzly-Bio-Oil

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis