Bartscher 900 K4 Serie Installation, Benutzung Und Wartung Seite 40

Maintenance
ATTENTION! Before doing any kind of maintenance or repairs, make sure that the
appliance is disconnected from the electric mains. Do not open the generator if the appliance
is still connected to the electric mains: HIGH VOLTAGE DANGER!
The following maintenance operations must be carried out at least once a year by specialized
personnel. It is advisable to have a maintenance contract.
 Check for correct functioning of all control and safety devices;
 Check the condition of the power cable;
 Clean the filter in non-woven fabric placed at the air entry of the fan, wash it carefully to
remove possible residues of dirt, rinse it, to dry it and place it at the same position.
SUBSTITUTING COMPONENTS
ATTENTION! Before carrying out any substitutions, make sure that the appliance is
disconnected from the electric mains.
Replacing of the potentiometer and of the induction led.
In order to replace the potentiometer and the induction leds, unscrew the control panel, unloose the
fixing screws and take it off, unloose the connection wires of the component and replace it with a
new one. Once replaced it, plug the wires again referring to the electrical scheme.
Replacing of the induction components.
The replacement of electronic parts must be done by the manufacturer. If the generator is faulty, call
the after-sale service.
Information for electrical and electronic devices used in EU countries
According to EU directives, devices marked with the following symbol , may not be disposed
of together with normal household waste.
To dispose of your used device, please use the locally available differentiated collection system or
consult your retailer when you buy an equivalent product.
By actively using the provided collection systems, you are contributing to the reuse, recycling and
enhancement of electrical or electronic devices and protecting the environment and health.
Abusive product disposal is punishable by law in accordance with current legislation.
WHEN REPLACING ANY COMPONENTS ONLY ORIGINAL PARTS SUPPLIED BY
THE MANUFACTURER SHOULD BE USED. THE WORK SHOULD BE CARRIED OUT
BY AUTHORIZED PERSONNEL.
THE MANUFACTURER RESERVES THE RIGHT TO MODIFY ANY OF THE
FEATURES OF THE APPLIANCES DESCRIBED IN THIS MANUAL WITHOUT
NOTICE.
Pag. 40/53