Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
No heating – the indicator light
is off
No heating – the indicator light
is on
Nothing happens if you turn
the potentiometer
The power level is not constant
(on/off in few minutes) – the
fan is on
The power level is not constant
(on/off in few minutes) – the
fan is off
The power level is not constant
(on/off in few minutes) – the
appliance has been used for a
long time continuously
Small metal objects (spoons,
knives) are heated if placed on
the cooking area
ATTENTION: NEVER open the cooking surface or the induction cooker before having
unplugged it from the electric net.
DANGER of high tension!
The cooking surface or the induction cooker must be opened only by qualified and authorized
technicians.
If it occurs that the cooking surface breaks, turn off the cooking unit and unplug it from the
electric feeding, place it in a suitable place awaiting to be repaired by qualified people.
Possible cause
There is no power supply
Check if the knob has been
turned clockwise
Check if the pot is suitable
and if it has been pieced
correctly
The pot is not suitable
The bottom of the pot has a
diameter smaller than 12 cm
The pot is not placed in the
middle of the cooking area
The appliance is faulty
The pot is not correctly
identified; poor pot
The cooling system is
blocked
The air filter is blocked
The room temperature is too
high
A phase is missing
The appliance is faulty
The potentiometer is faulty
The cooling system is
blocked
The fan is blocked
The fan is faulty
The inductance or the
cooking area are overheated
The pot is empty
The pot has some overheated
oil within
The system for recognizing
pots has lost its settings
Pag. 37/53
Possible solution
Check the connections to the electric supply –
Check the fuses
Turn the knob
Place the pot in the right position
Use a suitable pot
Use a suitable pot
Place the pot in the right position
CALL THE AFTER SALES SERVICE
Use a suitable pot
Check that air intake and outlet are free
Clean or replace the air filter
Check that the temperature of intake air is not
above 40°C
Check the fuse
Disconnect the appliance and call the after sales
service
Replace the component
Check that air intake and outlet are free
Clean or replace the fan
Disconnect the appliance and call the after sales
service
Switch off the appliance – take away the pot – wait
until the cooking area is cool
Call the after sales service
Werbung
Inhaltsverzeichnis
