Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3. Tech. Spec.
AYA
Layout surface (m
)
2
Layout span
Layout aspect ratio
Projected surface (m
)
2
Projected span (m)
Projected aspect ratio
Number of cells
Weight of the glider (kg)
Take-off weight range (kg)
Maximum symmetric control travel at maxi-
mum weight in flight (cm)
3.4. Riser lengths
Adjustable, removable or variable device: none.
The risers have no trimmers.
XS
S
M
21.60
23.36
25.27
10.06
10.46
10.88
4.69
4.69
4.69
19.11
20.68
22.36
8.34
8.67
9.02
3.64
3.64
3.64
37
37
37
4.15
4.40
4.70
50-72
60-80
75-95
See the certification protocols
Basic setting
XS, S
47 cm
A1
A2
47 cm
B
47 cm
47 cm
C
Accelerated
XS, S
A
36.5 cm
B
38.9 cm
C
40.3 cm
47.0 cm
D
Length of the
10.5 cm
speed system
User manual / Handbuch / Manuel / Návod k obsluze
4. T AKE-OFF , FLIGHT
L
XL
27.33
29.56
11.32
11.77
In general, the AYA will behave conventionally to most paraglid-
4.69
4.69
ers. However, listed below are several points which will enable
you to familiarise yourself with your new glider more rapidly.
24.19
26.16
4.1. Pre-flight Checks
9.38
9.75
• Check the sail for damage to both surfaces, the internal
3.64
3.64
• Check that the lines are not damaged or tangled.
37
37
• Check that the quick-links which connect the lines to the
4.95
5.25
• Check that the risers are not damaged or twisted.
85-110
100-130
• Lastly, check that the brake handles are correctly attached
4.2. Take-off
Lay the paraglider out with the leading edge in a horseshoe
M,L, XL
shape. Hold the A risers close to the quick links and move for-
50 cm
ward until the lines get stretched. You should now be perfectly
50 cm
centred with your wing. With no wind or light headwind, with
50 cm
lines stretched, AYA inflates rapidly and rises over your head
50 cm
with some dynamic steps.
We recommend that you do not pull the risers too far forward
M,L, XL
or down, which could cause a collapse of the leading edge, but
39.0 cm
simply follow them until your glider reaches its angle of flight. It
is important that the gravity centre of your body stays in front
41.5 cm
of your feet during the rise of the glider to constantly load the
43.0 cm
risers.
50.0 cm
A controlled inflation allows you to check the wings and
lines during the last phase as it comes up and thus avoids the
11.0 cm
need to use brakes. Depending on the wind conditions or the
Tolerance: +/- 0,5 cm
AYA
AND FL YING
TECHNIQUES
structure (ribs, diagonals) and seams.
risers are undamaged and correctly tightened.
and that each line runs freely through its pulley.
8
Werbung
Inhaltsverzeichnis
