Before First Use; Use And Operation - Klarstein Metrobreeze 9 New York City Bedienungsanleitung

EN
24

BEFORE FIRST USE

Remote Controller
1 Slide the battery cover on the back of the remote controller to open.
2 Insert 2 new alkaline 7th batteries. When inserted, their terminals shall be ensured
to be installed correctly.
3 Put the battery cover into place.
Important Hints on Using Batteries
• The remote controller only uses 7th alkaline bateries. Do not use rechargable or
other types of batteries.
• When replacing the batteries, replace both. Do not mix old and new batteries in
use.
• If the air conditioner is not used for a long time, remove the batteries from the
remote controller.
• If there is battery leakage, do not the battery.
• Chemicals inside the battery may cause burns or other health hazards; if their liquid
flows to the skin or clothing, rinse with water immediately; if eating it accidentally,
gargle with water immediately, and then go to a hospital and see a doctor for
further examination.

USE AND OPERATION

Refrigeration mode
• After being powered and turned on, its refrigeration mode or pressing mode button
to select refrigeration mode by default, and the refrigeration indicator light is on.
• Press the up or down button to adjust the settled temperature (16°C-30°C).
• Press the wind speed button to select high, medium or low wind speed.
Air distribution mode
• Press the mode button or via the remote controller to select air distribution mode,
and air distribution indicator light is on.
• Press the wind speed button to select high, medium or low wind speed.
• Temperature cannot be set.