SPORTSTECH PT300 Benutzerhandbuch Seite 25

STEP 6:
a
b
STEP 7:
Attach the backsupport to the left
and right handle apparatus.
a) with screws M10x35 and large
washers
a
b
b) with screws M10x45 and was-
hers (both side, 1 large washer on
the outside and one small washer
on the inside) and M10 nuts.
Attach the backrest to the
connecting apparatus using the
pre-assembled screws. Then
unscrew the pre-assembled
screws from the connecting
apparatus and attach it to the
backsupport.
25