SPORTSTECH KS600 Benutzerhandbuch Seite 25

Step 4: Hooking in the optional dip station
After you have screwed the dip station together with the two M8 bolt screws (#18), the two washers
(#22) and two M8 nuts (#19), connect it to the pull-up bar. Simply hook the optional dip station to
the lower bar of the pull-up bar.
Note:
The range of the optional dip station can be individually ad-
justed. There are six screw holes in the horizontal dip station
rod, three of which are on the left and three on the right.
When screwing the Dip-Station together, we recommend
using the two inner screw holes.
2x
M8 bolt screw (#18)
25
2x 2x
Washer (#22) M8 nut (#19)