Stryker L9000 LED Bedienungsanleitung Seite 31

Recommended Separation Distances Between Portable and Mobile RF Communications
The L9000 system is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The user of the L9000 system can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the L9000 system as recommended below, according to the maximum
Rated maximum output
power (W) of transmitter
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance (d) in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects, and people.
Equipment and the L9000 System
output power of the communications equipment.
Separation distance (m) according to frequency of transmitter
150 kHz to 80 MHz
d = 1,17 P
0.12
0.37
1.17
3.70
11.70
the transmitter manufacturer.
80 MHz to 800 MHz
d = 1,17 P
0.12
0.37
1.17
3.70
11.70
800 MHz to 2.5 GHz
d = 2,33 P
0.23
0.74
2.33
7.37
23.30
27