Cleaning And Maintenance; Cleaning The L9000; Replacing The Fuses; Disposing Of The L9000 - Stryker L9000 LED Bedienungsanleitung

Cleaning and Maintenance

Cleaning the L9000

W U
ARNING
1. Clean the external surfaces of the L9000 using a cloth or sponge
dampened with a mild detergent or disinfectant.
2. Clean and maintain the light cable according to the manufacturer's
instructions.
Caution Do not use any abrasive cleaners. Do not allow any liquid to
drip into the unit.
Caution Do not sterilize or immerse the L9000.

Replacing the Fuses

1. Unplug the light source from the AC outlet and remove the power cord
from the rear of the unit.
2. Unlatch the fuse holder and remove the fuse(s).
3. Replace the fuse(s) with fuses of the same value and rating.
W T
ARNING
(
SLOW BLOW
4. Reinstall the fuse holder.

Disposing of the L9000

The device must be disposed of according to local laws and hospital practices.
The device does not contain any hazardous materials.
This product is considered electronic equipment. It must not be disposed of as
unsorted municipal waste and must be collected separately. Please contact the
manufacturer or other authorized disposal company to decommission your
equipment.
22
L9000
NPLUG THE
O HELP AVOID THE RISK OF FIRE
,
HIGH BREAKING CAPACITY
BEFORE CLEANING THE UNIT
,
USE ONLY
.
T 5.0AH 250V
1500A) .
FUSES