Visual Display - Stryker L9000 LED Bedienungsanleitung

Visual Display

The L9000 provides feedback through the touch-screen LCD.
• Brightness: The LCD display shows the intensity level of the light as a
percentage between 0 and 100. For example, if the LCD shows "70, "
the light output to the fiberoptic cable is running at 70 percent of
capacity.
• The LCD also displays warning and error codes. The table below lists
and defines the warning and error codes displayed.
Code Definition
E-1 The LEDs have exceeded their
recommended operating temperature.
E-2 All conditions are met for the LEDs to
illuminate, yet it remains off.
E-3 The LEDs are kept off because the
electronics fan is not working properly.
E-4 The LEDs are kept off because the heat
pipe fan is not working properly.
E-5 All conditions are not met for the LEDs
to illuminate, yet it remains on.
Recommended
Action
Return the L9000 for
repair.
Return the L9000 for
repair.
Return the L9000 for
repair.
Return the L9000 for
repair.
Return the L9000 for
repair.
15