Battery Replacement - Conrad Electronic renkrorce Bedienungsanleitung

13. Battery replacement

• When the batteries of the weather station are empty, a battery symbol "
the indoor humidity indicator. The contrast of the display also greatly decreases when the batteries are
weak.
Replace the batteries with new ones.
All settings and measurement data are lost when replacing the batteries. Proceed as described
in Getting started.
• When the batteries of the outdoor sensor are empty, a battery symbol "
the indoor humidity indicator. When the batteries are weak, the radio range of the outdoor sensor also
decreases, and when the batteries are empty, the weather station will stop showing the readings of the
outdoor sensor.
Replace the batteries with new ones.
After replacing the batteries, it is necessary to initiate a manually search for the outdoor sensor
on the weather station, see chapter 12. b).
If the weather station cannot find the outdoor sensor, turn the outdoor sensor off for a few se-
conds using the I/O switch (B), then turn it on again. This will reset the outdoor sensor (Reset).
" appears to the right of
" appears to the right of
49