Table of Contents
Table des matières • Sommario • Inhaltsverzeichnis •
Contenidos • 目次 • 目录
English
Français
Italiano
Deutsch
Español
日本語
中文
WARNING!
Before performing any maintenance or installing any part or accessory:
Shutdown
Unplug
Follow all instructions carefully to avoid
the Segway PT.
the Segway PT.
serious injury, death and/or damage to the
Segway PT, rendering it unsafe to use.
3
8
14
20
26
32
38
2
WARNING!
Securely tighten and position the Tool-less
Release handle to point upwards. Do NOT
position the handle in a downward pointing
position. Positioning the Tool-less Release
handle in a downward pointing position could
interfere with the motion of the LeanSteer
Frame, limiting your ability to steer and could
result in serious injury and/or damage to your
Segway PT from loss of control, collisions, and
falls.
The LeanSteer Frame must be properly attached and secured. Failure to
properly attach the LeanSteer Frame and/or maintain the torque on the Wedge
Clamp with the Tool-less Release could result in slippage between the LeanSteer
Frame and the Segway PT. Using the Segway PT without properly assembling
the LeanSteer Frame and/or maintaining the torque on the Tool-less Release
could lead to an unexpected change in steering and could result in serious injury
or death and/or damage to your Segway PT from loss of control, collisions, and
falls.
Check the tightness of the joint between the LeanSteer Frame and the Pivot
Base Assembly routinely and every time the LeanSteer Frame is removed and
reinstalled [using the method outlined in the document].
3