Before Use; Charging The Battery - Hilti AG 4S-A22 Bedienungsanleitung

Ambient temperature for operation
Storage temperature
5.1 Technical data
Spindle length
Ambient temperature for operation
Storage temperature
5.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5.3 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
AG 4S-A22­125
Noise information
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound power level (L
WA
Uncertainty for the sound power level (K
Vibration information
Other applications, such as cutting, may produce vibration values that deviate from the given values.
Surface grinding with the vibration-absorbing side handle (a
Sanding with sandpaper with the vibration-absorbing side handle (a
Uncertainty (K)
6

Before use

6.1

Charging the battery

1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
*2223267*
Printed: 29.08.2019 | Doc-Nr: PUB / 5476774 / 000 / 02
)
pA
)
pA
)
)
WA
2223267
AG 4S-A22­125
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
22 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
81.5 dB(A)
3 dB(A)
92.5 dB(A)
3 dB(A)
) 4.7 m/s²
h,AG
) 5.3 m/s²
h,DS
1.5 m/s²
English 27