DAB BPH-E Serie Installations- Und Wartungsanleitungen Seite 54

Page 4.0:
Page 4.0 is displayed only if the regulating mode p-c or
p-v with set-point depending on temperature has been
chosen.
On page 4.0, press the outside left and right keys to set
the Tmax. (50°C or 80°C) with which to establish
dependence on temperature.
Hold down for a few seconds the central key "OK", which
will be highlighted -
chosen.
Press the central key to move on to page 5.0.
Pressing the central key + the hidden key takes you
back to the previous page.
Page 5.0:
Page 5.0 is displayed in all the pressure regulating
modes ( p) .
On page 5.0, press the outside left and right keys to set
"auto" or "economy" operating mode.
Hold down for a few seconds the central key "OK", which
will be highlighted -
chosen.
Press the central key to move on to page 6.0.
Pressing the central key + the hidden key takes you
back to the previous page
Page 6.0:
Page 6.0 is displayed if "economy" mode has been
chosen on page 5.0.
On page 6.0, press the outside left and right keys to set
the percentage value of reduction of the set point.
This reduction will be carried out if a contact is closed
between terminals 3-4 (
Hold down for a few seconds the central key "OK", which
will be highlighted -
selected.
Press the central key to move on to page 7.0.
Pressing the central key + the hidden key takes you
back to the previous page
Page 7.0:
-, to confirm the regulation
-, to confirm the regulation
.
).
- , to confirm the value
.
ENGLISH
On page 7.0, operation with a single or twin circulator can
be set.
The choice is made by pressing the outside left and right
keys.
Hold down for a few seconds the central key "OK", which
will be highlighted -
Press the central key to move on to page 8.0.
Pressing the central key + the hidden key takes you back
to the previous page
Page 8.0:
Page 8.0 is displayed only if operation with twin circulators
has been chosen.
On page 8.0, press the outside left and right keys to set
one of the 3 possible operating modes:
-
Alternate every 24h:
-
Simultaneous:
-
Principal/Reserve:
Hold down for a few seconds the central key "OK", which
will be highlighted -
chosen.
Press the central key to move on to page 9.0.
Pressing the central key + the hidden key takes you back
to the previous page
Attention! If one of the two Dialogue
circulators goes into alarm status,
operation of the standby Dialogue
circulator is enabled!
Page 9.0:
On page 9.0, press the left and right keys to choose the
parameter to be displayed on the Home Page.
Hold down for a few seconds the central key "OK", which
will be highlighted -
chosen.
Press the central key to move on to page 10.0.
Pressing the central key + the hidden key takes you back
to the previous page
Page 10.0:
On page 10.0, press the left and right keys to choose the
language in which the messages are to be displayed.
48
- , to confirm the choice made.
.
- , to confirm the regulation
.
- , to confirm the regulation
.