English
12.2 – CLEANING OF THE AUTOMATIC CAPPUCCINO MAKER
Apart from cleaning it every time it has been used, please clean it every now and again more accurately (picture 2):
•
Remove the silicone tube (B) from the suction tap (D).
•
Unscrew the threaded nut (A) turning it anticlockwise until the steam nozzle comes out (8).
•
Remove the part (F) pressing on its milled sides from the main frothing unit (E).
•
Remove the suction tap (D) from the main frothing unit (E).
•
Remove the regulation knob (C) from the suction tap (D).
Rinse everything thoroughly with warm water to remove possible milk rests and reassemble the automatic
cappuccino maker again.
13 – TECHNICAL DATA
Power supply: 230-240V 50Hz ; 120V 60Hz
Power: 950W
Warming time: about 6 minutes
Pressure pump: 15 bar
Tank capacity: 3 litres
Dimensions (HxLxD): 335x220x235 mmWeight: 8 kg
32