Product Overview; Product Contents - Hach HT 200 S Basis Bedienungsanleitung

Product overview

Product contents

Please check that the order is complete. If anything is missing or
damaged, please contact the manufacturer immediately.
The following components are supplied as standard with the thermostat:
• HT 200 S high-temperature thermostat
• Removal aid for cuvette adapter
• Cuvette adapter 20/13 mm (12 x)
• Power cable
• User Manual
Note: If any of these items are missing or damaged, please contact the
manufacturer or the responsible sales representative immediately.
The HT 200 S high-temperature thermostat with HSD (high-speed
digestion) technology meets all the technical requirements and safety
regulations for fast and efficient digestion.
The HT 200 S high-temperature thermostat has twelve digestion
compartments for round cuvettes and reaction tubes.
N O T I C E
Samples in 13-mm (LCK) round cuvettes cannot be digested unless the
accompanying adapter is used! The adapter is removed from the thermostat using
the removal tool; see figure 1.
Figure 1 Removal tool and adapter
1 Removal tool
D A N G E R
For quality and safety reasons, only Hach Lange original cuvettes and reaction
tubes may be used when conducting the analyses.
The sample cuvettes and sample reaction tubes are prepared in accordance with
the currently valid working procedure.
Select the required temperature program on the HT 200 S in accordance with the
information in the currently valid working procedure.
Higher temperatures than those specified in the working procedure can cause the
cuvettes or reaction tubes to shatter or become damaged in the thermostat block.
If this happens, contact Technical Customer Service.
2 Adapter
English 97