English - IKEA TRÅDFRI Bedienungsanleitung

ENGLISH

REMOTE CONTROL FUNCTIONS
ON/OFF: Press to turn your light source on and
off.
Press and hold for at least 3 seconds to
synchronize your lights.
Dim up/down: Short presses will dim up/down
in steps. To dim up/down seamlessly, press and
hold the button.
Change white spectrum, colours or scenes.
Pairing: Add IKEA Smart Lighting products to
your system. See instructions below.
ADDING DEVICES TO YOUR REMOTE CONTROL
When the remote control is sold together with
a light source (in the same package), they are
already paired. If the remote control is purchased
separately, you must manually pair it to your light
source.
To add light sources, just repeat the steps below.
1 Make sure that your light source is installed and
the main power switch is turned on.
2 Hold the remote control close to the light source
you want to add (no more than 5 cm away).
3 Press and hold the pairing button
10 seconds. A red light will shine steadily on
the remote control. Your light source will begin
to dim and flash one time to indicate that it has
been successfully paired.
Up to 10 light sources can be paired with 1 remote
control.
Make sure to pair them one at a time. If the light
sources are close to each other, disconnect those
that have already been paired from the main power
switch.
FACTORY RESET YOUR DEVICES
For light sources:
Toggle the main switch 6 times.
For remote control:
Press the pairing button
seconds.
SYNCHRONIZING
If your light source becomes unsynchronized,
press and hold the ON/OFF button
3 seconds to return the light source to its default
setting (100% brightness, 2700K).
CHANGING THE BATTERY
When the remote control is used regularly and as
intended, the batteries will last for approximately
for at least 2 years.
When it's time to replace the battery, a red LED
4 times within 5
for at least
4