Dometic FRIGO 8882040004 Montageanleitung Seite 30

Frigo
➤ Put the drive unit (1) in place and align. Do not fasten in place.
➤ Slightly screw in the rear boardlocks of the seat and refit the seat.
➤ Mount the control unit (4) next to the passenger seat on the rear wall.
I
NOTE
Ensure that the RESET switch is easily accessible when installing the control
unit.
➤ Install the battery charger (5) underneath the passenger seat on the rear wall.
➤ Alter the upper housing of the tool box as shown.
30
Mounting the drive unit