Kübler CODIX 552 Bedienungsanleitung Seite 45

4.4.3 Resetting the Total value
This setting affects the input function Latch / Reset (see sec-
tion 3 6 and section 5
Menu
Set totalizer value to 0 with:
1
A Latch signal can be applied to the Latch / Reset input.
The display will be kept on hold as long as the Latch sig-
nal is present. That is, the currently displayed value will be
'frozen', while the measurement and the totalising keep on
running in the background.
Hint: The total value cannot be reset with this setup.
2
A reset pulse can be applied to the Latch / Reset input.
The total value in the totalizer will be reset to 0 with the
reset pulse.
Hint: The displayed value cannot be put on hold with this
setup.
23).
Selection Enter
No resetting
Only electrical resetting
Only manual resetting
Manual and electrical resetting
1
2
2
21