Getting acquainted with the display and keys
The selection or the setting can be repeatedly run through as
often as wished because of the rotational principle.
Menu item: The display alternates
every 2 seconds between the
menu item and the selection.
Entering into the menu item:
Either a selection has to be made or a value has to be setup.
Press red key
– Making a selection:
With the grey key
one after the other.
Enter the selection: Press keys
The selected parameter will be stored. The next menu item
appears.
Recommendation: First press the key and then the gray
one. Thus, no parameter will be unintentionally altered.
– Entering a value:
The flashing digit indicates that it is
enabled for entry.
Press grey key
Where negative values are permitted, the highest digit will
switch from "9" to "–" , then "–1", and only then to "0".
Press red key
Enter value: Press keys
value will be stored. The next menu item appears.
. The display stops alternating.
all possible settings will be displayed
, the number will be incremented.
to switch to the next digit.
Menu
Selection
simultaneously.
simultaneously, the
9