Operation In Combination With An External Timer Or Coinbox; Operation Without The Use Of An External Timer Or Coinbox - HAPRO Luxura V5 Anleitung

Operation in combination with an external timer or coinbox:

The machine starts up automatically if there is no "remote start" function on the external timer or coinbox. If this function is
available, the machine must be started by pressing the "start" button.
Start
Note: If the external timer or coinbox does not have a "remote start" function, but the machine has to be started up using the
"start" button, you dealer will be able to set this up for you.
By pressing the "stop" button once, the machine's operation will be paused. If the"stop" button is pressed several times, the ma-
chine will remain set at pause. The machine will only stop when the tanning time has expired.
Stop
If the machine is set at pause, it can be restarted by pressing the "start" button.
Note: The tanning time ascends numerically.
Start

Operation without the use of an external timer or coinbox:

By pressing the "start" button once, the tanning time can be shortened.
Start
The maximum tanning time will be indicated by the flashing numbers on the display.
The tanning time can be decreased or increased by using the "body cooling lower and higher" buttons.
Body cooling Body cooling
lower higher
By pressing the "start" button, the machine starts operating.
Start
If during tanning the "stop" button is pressed once, the machine's operation will be paused. The lights will go off and the ventilator
will continue for another three minutes. The tanning time continues to run down. The tanning session can be restarted at any time
by pressing the "start" button.
Stop
If the "stop" button is pressed a second time, the machine will start a compulsory after-cooling. The tanning session has now
finished.
9